Designs in Machine Embroidery (DIME) has been so gracious to allow me to do an Embroider-along with you featuring a free table runner pattern that is featured in the May/June 2019 issue of the DIME magazine. The only catch was I had to wait until July 1st to share with you how to get the freebie machine embroidery patterns. The embroider-along will be like Embroidery 101. We will go slow with learning how to thread your machine and getting familiar with the parts of it. I want you to go dig around and find the manual for your machine. Yes, you have to take the machine OUT of the box! Then I want you to read that manual like you would a book. I guarantee you’re going to learn something. You spent a ton of money on this thing and it deserves better than remaining in a box. You have powerful tool in your hands and it’s time to learn how to use it.
Now, I CAN give you the list of supplies you will need. This particular pattern is for hoops larger than 5×7 however, I’m going to search for some free designs that can work in smaller hoops. No promises, but I’ll do what I can. I will post where you can get the free designs on July 1st and I’ll also post a .pdf of the directions on my blog then.
Here’s the supply list from the article. The links below are Amazon affiliate links. If you purchase from Amazon using these links, I make a few pennies. Don’t feel obligated; the legal beagles make me tell you this. If the specific product name isn’t mentioned (like the painter’s tape, needles, and thread) those are my Amazon choices vs. coming from DIME).
- Floriani Wet & Gone or OESD Aqua Mesh Water Soluble Stabilizer
- 1 yard Pellon Shape Flex
- Six 6″ squares of batting (I’m using 80/20 White & Natural)
- Six 6″ squares of different pastel fabrics for the seashell applique
- Six 2.5″ x 6″ different pastel fabrics for accent rectangles
- 1/4 yard background fabric (42″)
- 1/2 yard backing fabric
- Quilter’s Dream Blend Batting (craft size)
- 1/4 yard binding fabric
- Painter’s tape
- Mark-B-Gone water soluble pen
- 75 embroidery needle
- Embroidery thread
Now, if you don’t have those special battings or that particular brand of WSS (water soluble stablizer), use what you have on-hand. I will be using my Sulky Solvy for my WSS. This is a learning exercise for newbies and I don’t want you to feel like you have to rush out and spend scads of cash on specialized products. However, for the best results or if you’re not sure, use what DIME recommends.
A note on the thread linked above. That thread is recommended for many machines and used to be called Embroidex. I have a couple of boxes of it and I’ve had good results and it gets good Amazon reviews. I originally bought it because name-brand thread is so expensive and I wasn’t sure if I would like this whole machine embroidery thing so I bought it to keep my initial investment to a minimum. Yes, I’ve had thread breaks, but I’ve also had thread breaks with Madiera. I’ve not had any thread breaks with Isacord but my quilt shop carries that for about $6 per spool. You use or buy what you have on hand or can afford.
OK, this should be fun! Again, I’ll post where you can get the free designs on July 1st! You have homework:
- Take your machine out of the box.
- Read your manual.
- Find fabrics you want to use.
- Choose your thread colors. You will need 3-4 per shell (see below) and one that disappears on the background fabrics to create the trapunto effect.
- Take a deep breath…YOU CAN DO THIS!! If you have questions or get stuck, comment on the post in this blog for that part, and I’ll respond. I’ll write it out and give a video demo if need be.
Also, DIME has provided a discount to my subscribers if you want to subscribe to the magazine so you can get TWO years for the price of ONE! YAY!! Here’s the link. No coupon code required. It is only good until July 31, 2019. http://www.dzgns.com/magazine/BT142
So excited!! We start in 2 weeks. This will be fun!
I love my new potholders!
